Fire Extinguisher Inspection Brooklyn, NY

Fire is no joke, every year hundreds of fires break-out at commercial buildings, putting the lives of hundreds if people in danger.
Get Your

Free Quote Now

Fill The Form Below And The First Atlantic Fire Extinguisher Inspection Co. Represntative Will Be In Touch

Fire Icon

Fire Safety

Fire Extinguisher

Fire Extinguisher

Fire Extinguisher

Compliance

Hood Installation Icon

Hood Installation

Serving Brookyn And It’s Surrounding Areas

As an organisation if you do not take fire protection seriously you lose the insurance money and you might get sued for millions of dollars. Do not put yourself in such a situation and get licenced Fire Extinguisher inspection of your business in Brooklyn, NY. Atlantic Fire Extinguisher Inspection Co checks and inspects every device in your facility properly.

National Fire Protection Association NFPA requires you to inspect your fire extinguisher and fire protection system annually. Our technicians are licensed to do the inspection by the state government. We will visually inspect each of the fire extinguishers, check they are working correctly, the pin is in place and provide you all the needed paperwork so you can use it for insurance.

Fire Extinguisher Expert Brooklyn
We inspect all types of fire extinguishers. There are mainly five types, wet gas, CO2, dry powder, spray, and water. To comply with NFPA codes and conduct it buildings need to fire extinguishers that will put out fires from probable fire that can break-out at your building. The need for various types of fire extinguisher comes from the various types of fuel that may start a fire. The various types of fires caused by various fuels are known as different classes of fire. If it is a restaurant natural gas fires, cooking oil fires will be the most probable ones so, carbon dioxide extinguishers and dry powder. If you are not sure which type of fire extinguishers to install, our qualified men can help you determine the right type and install it for you.

How we check when we visit your site

  • Annual Fire Extinguisher Inspection for all types of extinguishers in accordance with NFPA 10
  • We provide proper documentation for the inspection done.
  • 6 and 12-years fire extinguishers inspection and replacement as per NFPA.
  • We will check the pin of fire extinguisher, check the hydrostat, rechange etc.
  • We check if the fire extinguishers are installed at the right places. If the fire extinguishers are not installed at the right location we can install them correctly.
  • We provide training and demonstration of fire extinguisher usage.
  • Fire escape routes are checked for signs and aclets and accessories.
    Call us for qualified Fire extinguisher inspection.

Types of Fire Extinguishers

Foam Extinguishers

Foam extinguishers are used for class B fires. You can check the label on the fire extinguisher to identify what type of fire it extinguishes. For Class B fires, that are caused by organic material such as coal, textiles, cardboard, paper etc, you will see a cream color on the body of the cylinder. The foam fire extinguisher is water based, however it can be used for class A fires as well. Make sure you don’t use Fam extinguishers to put out fires from electrical appliances or metal fires.

Water Extinguishers

Water is an age old fire extinguisher and is the first thing we turn to in case of a fire break-out. However, we have to be careful what we use a water extinguisher on. The mark on the fire extinguisher for a water extinguisher will be red. You can use a water extinguisher when there is no oil based fuel or electricity involved in the fires. Most commonly it is used to put out paper, textile, cardboard, wool, coal garment fires.

Dry Powder Extinguishers

Dry POwder extinguishers can be used for class, class B and Class C fires. This is one of the most common types of fire extinguishers used in places where fire break-out has the highest probability. The dry powder extinguishers can be used for putting out fires from electric appliances, oil fires, fires from metals, on textile, paper, cardboard, garment etc. The dry powder extinguisher is marked by blue color on the cylinder.

When it comes to fires caused by a variety of organic materials like wood, coal, textiles, clothing, cardboard and paper, dry power is very powerful. It can also be used for fires caused by flammable liquids like oil and natural gas, and for flammable substances such as acetylene and liquid petroleum gas. Good thing about Dry powder extinguisher is that it can be used to put out fires on electric equipment upto 1000V. Do not try to use dry powder extinguisher on electric equipment fire on more than 1000V.

Wet Chemical Extinguishers

Wet chemical extinguishers are used to put out class F fires. It is not a common type of fire extinguisher. The type of fire extinguished by wet chemical extinguisher can also be extinguished by Foam extinguishers. The fire includes cooking oils and fats. The wet chemical fire extinguisher can also be used on fire in Class A, but more common are spray or gas extinguishers. Dry powder extinguishers smother fires through the creation of a membrane between the gasoline and the oxygen supply. For this sort of extinguisher the mark color is yellow. In fires caused by various organic materials, including wood, coal, textiles, garments, cardboard and paper, wet chemical extinguishers can also be used.

Carbon Dioxide extinguishers

Carbon dioxide extinguishers are common for electric fires. They can cut the supply of oxygen from an area and extinguish the fire. They can be used in server rooms, so so least amount of damage to the equipment while putting out fire effectively.

Types of Fire Extinguishers

Foam Extinguishers

Foam extinguishers are used for class B fires. You can check the label on the fire extinguisher to identify what type of fire it extinguishes. For Class B fires, that are caused by organic material such as coal, textiles, cardboard, paper etc, you will see a cream color on the body of the cylinder. The foam fire extinguisher is water based, however it can be used for class A fires as well. Make sure you don’t use Fam extinguishers to put out fires from electrical appliances or metal fires.

Water Extinguishers

Water is an age old fire extinguisher and is the first thing we turn to in case of a fire break-out. However, we have to be careful what we use a water extinguisher on. The mark on the fire extinguisher for a water extinguisher will be red. You can use a water extinguisher when there is no oil based fuel or electricity involved in the fires. Most commonly it is used to put out paper, textile, cardboard, wool, coal garment fires.

Dry Powder Extinguishers

Dry POwder extinguishers can be used for class, class B and Class C fires. This is one of the most common types of fire extinguishers used in places where fire break-out has the highest probability. The dry powder extinguishers can be used for putting out fires from electric appliances, oil fires, fires from metals, on textile, paper, cardboard, garment etc. The dry powder extinguisher is marked by blue color on the cylinder.

When it comes to fires caused by a variety of organic materials like wood, coal, textiles, clothing, cardboard and paper, dry power is very powerful. It can also be used for fires caused by flammable liquids like oil and natural gas, and for flammable substances such as acetylene and liquid petroleum gas. Good thing about Dry powder extinguisher is that it can be used to put out fires on electric equipment upto 1000V. Do not try to use dry powder extinguisher on electric equipment fire on more than 1000V.

Wet Chemical Extinguishers

Wet chemical extinguishers are used to put out class F fires. It is not a common type of fire extinguisher. The type of fire extinguished by wet chemical extinguisher can also be extinguished by Foam extinguishers. The fire includes cooking oils and fats. The wet chemical fire extinguisher can also be used on fire in Class A, but more common are spray or gas extinguishers. Dry powder extinguishers smother fires through the creation of a membrane between the gasoline and the oxygen supply. For this sort of extinguisher the mark color is yellow. In fires caused by various organic materials, including wood, coal, textiles, garments, cardboard and paper, wet chemical extinguishers can also be used.

Carbon Dioxide extinguishers

Carbon dioxide extinguishers are common for electric fires. They can cut the supply of oxygen from an area and extinguish the fire. They can be used in server rooms, so so least amount of damage to the equipment while putting out fire effectively.

Based on the size of the building and probability of a possible fire breakout the schedule might change. We will appoint a qualified team who will look at everything closely. We will perform external maintenance and holistic testing. Fire extinguishers often lose their pressure, get corroded or get bent and damaged in some way. We will change such fire extinguishers and get you new ones that are certified. We know what codes and rules you will have to abide by to get a green signal from all the fire protection authorities in Brooklyn, NY.

Address

NYC
Long Island

Phone

Long Island : 631-250-5091

NYC's 5 Boroughs :  917-634-4211

Email

info@u8kg1.freezikao.com

Notes:

This website is for informational and lead generation purposes only.  This website connects you with a professional company that is licensed and insured in your area

Get a Free Quote Now